LaserLiner VarioStand L 180 cm Mode D'emploi page 6

Completely read through the operating instructions as well as the latest
!
information under the internet link at the end of these instructions.
Follow the instructions they contain. This document must be kept in a
safe place and passed on together with the device.
Function / application
Variable tripod with adapter for mounting devices with 1/4" and 5/8" thread.
Thanks to the special rubber-steel combination tips the tripod can be easily
adapted to different surfaces.
General safety instructions
– The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
– Keep out of reach of children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme temperatures
or significant vibration.
– Take care not to pinch your fingers when folding the tripod into
transport position.
– Do not set up the tripod on unsecured roads: risk of accident.
Instructions for use
– Avoid moisture and sand, clean thoroughly after use.
– Set up the tripod as perpendicular as possible on firm ground:
risk of toppling.
– Align to centre of gravity: risk of toppling.
– Only use suitable instruments with 1/4" or 5/8" connection up to
the maximum load capacity.
– Before transporting or storing, instruments must be removed from
the tripod and the tripod folded into the transport position.
Device description
1 Mount for thread adapter
2 Centre column
3 Centre column lock screw
4 Quick-release lock for adjusting
the tripod legs
06
EN
page 02)
(see Fig. A,
5 Sturdy steel feet with
rubber protector
6 5/8" thread adapter
7 1/4" thread adapter