Basic Operations - JVC KD-SH99 Manuel D'instructions

2
1
Turn on the power and select the
source.
FM TUNER CD PLAY
or
AM TUNER
AUX INPUT
* If a disc is not in the loading slot, you cannot
select CD as the source to play.
** Without connecting the CD changer, you
cannot select it as the source to play.
To operate the tuner (FM or AM),
see pages 8 – 10.
To play a CD,
see pages 11 – 13.
To play an MP3 disc,
see pages 16 – 20.
To operate external components
(AUX INPUT and LINE INPUT),
see pages 31 – 32.
To operate the CD changer,
see pages 33 – 34.
1
When you press the button
for the first time, the power
comes on. Then each time
you press the button, the
source changes as follows:
*
CD CHANGER
LINE INPUT

BASIC OPERATIONS

2
Adjust the volume.
**
Volume level indicator
Note:
After adjusting the volume, you can push in the
control dial to avoid unintended operations.
To use it again, push the control dial again to
make it come out.
3
Adjust the sound as you want.
(See page 21.)
To drop the volume in a moment
Press and hold
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press and
hold the button again.
• If you turn the control dial clockwise, you can
also restore the sound.
To turn off the power
Press and hold SOURCE
appears on the display.
Note:
When you use this unit for
the first time, set the built-in
clock correctly, see page 24.
To increase the volume.
To decrease the volume.
Volume level appears.
/ATT while listening to any
until "SEE YOU"
7