Trouble Shooting; Problem / Diagnostics/Solution / Suggestions - Bezzera BB012 Manuel D'instructions

7 - TROUBLE SHOOTING

Problem
The switch light (Fig. 01; pos.
13) does not turn on.
The switch light (Fig. 01; pos.
13) is ON but the grinder does
not work.
The appliance functions cor-
rectly but ground coffee is not
dispensed.
The coffee dispenses insuffi-
ciently, is too cold or coffee de-
posit on the cup bottom.
The coffee dispenses too
abundantly.
Diagnostics/Solution
The machine is not powered.
Thermal protector has cut in.
Coffee beans receptacle gate
(Fig. 01; pos. 1) closed.
The coffee dispenses drop by
drop and the quality of the cof-
fee is not good and presents a
dark cream.
Possible causes:
1 - The coffee grind is too fine.
2 - The coffee into the filter
holder is too pressed.
3 - The dose into the filter holder
is excessive.
4 - The grinder mills are worn.
The coffee dispenses too quickly
and the cream is clearer than
usual.
Possible causes:
1 - The grind of the coffee is too
coarse.
2 - The coffee into the filter hold-
er is not pressed enough.
3 - The dose into the filter holder
is excessive.
29
MOD. BEZZERA BB012
Suggestions
Make sure the plug is correctly
inserted and that the power
cord is not damaged.
Wait until the appliance has
cooled down.
Push the gate (Fig. 01; pos. 1)
towards the inside to open the
passage of the coffee to the
grinder.
In cases 1-2-3, it is necessary to
adjust the grinder correctly.
In case 4,it is necessary to call a
technician.
In cases 1-2-3, it is necessary to
adjust the grinder correctly.