Control and features
ing are described the main key functions.
1. Timer Key
•
adjusted between 20 minutes and 1 minute.
•
setup mode, and user can adjust the timer countdown
can be initiated immediately pressing the timer key, after
setting the timer duration or pressing the timer key twice
•
If not action occurs within 5 seconds the countdown will start.
•
to the timer and no motor action will occur.
•
the timer key again.
2. Light Key
•
•
3. Display
•
Shows the hood settings.
4. "-" Key. Speed Decrease / OFF
•
the fan.
•
•
•
fan will be set to second speed.
•
backlight will light up.
5. "+" Key. Speed Increase / ON
•
•
•
the fan will be set to second speed.
•
the fan will be set to third speed.
•
a beep will sound.
Special functions
Clock programming
•
during an active timed function.
-
1 2 3
11
•
•
key for 5 seconds, and after, the clock can be adjusted
clock programming mode.
•
be of 5 minutes. During this option the control will
round to the nearest 5 minutes.
•
•
the programmed clock time and will add one minute
to the set clock.
•
required to be washed.
•
normal display operation.
•
installed are required to be replaced or reactivated.
•
the normal display operation.
Audible signal activation and deactivation
•
•
If the audible signal is activated, a tone must sound and
•
appear on the display for 2 second and no sound must sound.
(Recirculating accessories)
•
•
•
alarm is disabled.
Heat sensor
•
on the blower at second speed if excessive heat
•
blower will be set automatically to second speed.
•
During this state, the user may raise the blower speed to
third speed but can not decrease the speed.
•
When the temperature level on the hood drops to normal,
before the alarm occured.