Warn 71881 Instructions D'installation page 5

INSTALLATION CONT.
4. Secure mounting bracket (A1) to factory mounting tabs
using 2, 5/16 - 18 x 1" hex head bolts (B5) 2, 5/16 - 18
flat washers (B1) and 2, 5/16 - 18 lock nuts (B3). Do
not tighten at this time. See Figure 5.
5. Assemble clamp bracket (A2) to mounting bracket
(A1). Clamp bracket (A2) will wrap around ATV
frame and secure to mounting bracket (A1). Attach
clamp bracket (A2) to mounting bracket (A1) using 2,
5/16 - 18 x 1" hex head bolts (B5), 2, 5/16 flat washers
(B1) and 2, 5/16 - 18 lock nuts (B3). See Figure 6.
Note: Clamp bracket is directional, see Figure 7 for
diagram.
WARN INDUSTRIES
©2005 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
Top Bolts
PAGE 5
Mounting Tabs
Figure 4
Bottom Bolts
Figure 5
Figure 6
71880A0