Télécharger Imprimer la page

Midea NY2009-20MR Manuel Du Propriétaire page 13

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 42
PART FIGURE
Fin
Control panel
Cord wrap
Caster assembly
Use of oil filled radiator
1,Turn the heater upside down.
2. As shown in figure 1, align the mounting hole of a set of caster assembly
and install it on the screw of the caster pad plate at the end of the radiator fin,
and The other caster assembly is aligned to the screws mounted at the
bottom of the control box.
3,As shown in figure 2, two sets of caster components are tightened with four
butterfly nuts. Install solid and then put the heater in place-just put the wheels
on the ground.
butterfly nuts
control box
figure 1
figure 2
3

Publicité

loading