Télécharger Imprimer la page
Whirlpool Cabrio WTW8000DW Guide De Démarrage Rapide
Whirlpool Cabrio WTW8000DW Guide De Démarrage Rapide

Whirlpool Cabrio WTW8000DW Guide De Démarrage Rapide

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

OPERATING INSTRUCTIONS
WARNING
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS, located
in your appliance's Owner's Manual, before operating this appliance.
NOTES:
 Not all features and cycles are on all models, and control panel
appearance may vary.
 If your model has a touch interface, the control panel features a
sensitive surface that responds to a light touch of your finger. To
ensure your selections are registered, touch the control panel
with your fingertip, not your fingernail. When selecting a setting or
option, simply touch its name.
 If your model has physical buttons, make sure to press the button
firmly.
 At cycle completion, your setting and option choices will be
remembered for the next cycle. However, if power to the washer
is lost, the settings and options will go back to the factory
defaults.
Button Descriptions
POWER BUTTON
Touch to turn the washer on. Touching once while the washer is on will
cancel the current cycle; touching twice will turn the washer off.
WHAT TO WASH/HOW TO WASH
First select a cycle from "What to Wash" and then select "How to Wash" to
get the best combination cycle available for the type of items you are going
to wash. See online "Cycle Guide" for cycle details.
START/PAUSE BUTTON
Touch and hold the Start/Pause button to begin the selected cycle; touch
again to pause a cycle.
LED TIME/STATUS DISPLAY
The Estimated Time Remaining display shows the time required for the
cycle to complete. Factors such as load size and water pressure may
affect the time shown in the display. Tightly packed loads, unbalanced
loads, or excessive suds may cause the washer to adjust the cycle time,
as well.
If you have set a delay start to the cycle, the Estimated Time Remaining
display will show the delay time adjusted. When the cycle is complete,
the Done indicator will light until the lid is opened.
Add Garment
When Add Garment is lit, you may pause the washer, open the lid, and
add items. Touch and hold the Start/Pause button to start the washer
again.
OPTIONS
You may add or remove options for each cycle. Not all options can be
used with all cycles, and some are preset to work with certain cycles.
Delay Start
Touch Delay Start to delay the start of the wash cycle up to 12 hours
"12H." Touch Delay Start until a "0H" appears in the status display to turn
off, or touch the Power button.
End Beep
Use this to turn the signal indicating the end of a wash cycle to low,
medium, high, or off.
NOTE: You may also adjust the tones that sound when a feature,
setting, or option is touched. Touch and hold End Beep for about 3
seconds to turn key activation sounds to low, medium, high or off.
Steam Clean (depending on model)
The Steam Clean option adds additional soak and wash time to many
cycles to help remove tough stains, as well as a steam boost for added
cleaning power. Steam Clean uses a heater within the washer to
maintain the selected temperature setting throughout the wash period.
Steam Clean may be selected as an option with other cycles.
Adding Laundry Products
IMPORTANT: Using non-HE detergent will likely result in longer cycle times and reduced rinsing performance. It may also result in component malfunction and, over time, buildup of mold or mildew. HE detergents should be low-
sudsing and quick-dispersing to produce the right amount of suds for the best performance.
Adding HE detergent to basket:
Single-dose laundry packets, color-safe bleach, Oxi-type
boosters, or fabric softener crystals can be added to the
basket prior to adding laundry.
NOTE: Follow the manufacturer's instructions to determine
the amount of laundry products to use.
W11354856A
W11387555A-SP
®
/™ ©2019 All rights reserved. Used under license in Canada.
Top Load Washer Quick Start Guide
Step 1. Add HE Detergent
NOTE: See the "Adding Laundry
Products" section for more
information on adding HE
detergent, fabric softener, and/or
bleach.
Step 2. Load Clothes
For best results, load garments in
loose heaps evenly around the
basket wall.
Step 3. Turn Power On
Step 4. Close Lid; then Select Cycle
and Settings
Step 5. Press Start/Pause
Deep Clean (depending on model)
This option provides enhanced cleaning action for tough stains. It will add
additional agitation and soak time to the cycle.
Clean Boost (depending on model)
This option provides enhanced cleaning action for tough stains. It will add
additional agitation and soak time to the cycle.
UTILITY TOOLS
Clean Washer
Use this every 30 washes to keep the inside of your washer fresh and clean.
This cycle uses a higher water level. Use with affresh
or liquid chlorine bleach to thoroughly clean the inside of your washer. This
cycle should not be interrupted. See "Washer Care" in the "Washer
Maintenance and Care" section of your Owner's Manual.
IMPORTANT: Do not place garments or other items in the washer during the
Clean Washer cycle. Use this cycle with an empty washer tub.
Rinse & Spin
Combines a rinse and high-speed spin for loads requiring an additional rinse
cycle or to complete a load after power interruption. Also use for loads that
require rinsing only.
Extra Rinse
This option can be used to automatically add a second rinse to most cycles.
Presoak
Use this option to add an extra soak period to any cycle to help loosen tough
stains. The washer will fill and pause to soak, then begin the selected cycle.
LID
The Lid Lock indicator lights up when the lid is locked and cannot be opened.
If you need to open the lid, touch and hold the Start/Pause button. The lid will
unlock once the washer movement has stopped. This may take several
minutes if the load was spinning at high speed. Touch and hold the Start/
Pause button again to restart the cycle.
Adding liquid chlorine bleach:
Do not overfill, dilute, or use more than 1 cup
(236 mL). Do not use color-safe bleach or Oxi
products in the same cycle with liquid chlorine
bleach.
Cycle Guide – Normal Cycle
Your Whirlpool
Cabrio
washer has a unique user interface to help you select the best cycle you need for
®
®
your load. Not all cycles and options are available on all models. Not all settings and options are available
on each cycle.
Items to Wash:
"What to
Wash":
Athletic/high
Mixed
performance wear,
pajamas, sweatshirts,
colorfast items, terry
cloth, towels, jeans,
cottons, linens and T-
shirts.
Online Ordering Information
For detailed installation instruction and maintenance information, winter storage, and transportation tips,
please see the Owner's Manual included with your machine.
For information on any of the following items, a full cycle guide, detailed product dimensions, or for complete
instructions for use and installation, please visit https://www.whirlpool.com/owners, or in Canada
https://www.whirlpool.ca/owners. This may save you the cost of a service call.
However, if you need to contact us, use the information listed below for the appropriate region.
United States:
1–800–253–1301
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022–2692
CYCLE MODIFIERS
When you select a cycle, its default settings or the previous cycle selection
used will light up.
Temperature
The wash Temperature senses and maintains uniform water temperatures
by regulating incoming hot and cold water. Select a wash temperature
based on the type of fabric and soils being washed. For best results, follow
the garment label instructions using the warmest wash water safe for your
fabric.
 On some models and cycles, warm and hot water will be cooler than
®
Washer Cleaner tablet
what your previous washer provided.
 Even in a cold- or cool-water wash, some warm water may be added to
the washer to maintain a minimum temperature.
Soil Level
Soil Level (wash time) is preset for each wash cycle. As you touch Soil
Level, the cycle time (minutes) will increase or decrease in the Estimated
Time Remaining display and a different wash time will appear.
Select the most suitable setting for your load. For heavily soiled items,
select Heavy Soil Level for more wash time. For lightly soiled items, select
Light Soil Level for less wash time. Lighter soil level setting will help reduce
tangling and wrinkling.
Spin Speed
This washer automatically selects the spin speed based on the cycle
selected. The preset speeds can be changed. Not all spin speeds are
available with all cycles.
 Faster spin speeds mean shorter dry times, but may increase wrinkling
in your load.
 Slower spin speeds mean less wrinkling, but will leave your load more
damp.
Adding HE detergent to dispenser:
Add a measured amount of HE liquid detergent into detergent tray. This tray
holds 3 oz. (89 mL). Do not overfill tray- adding too much detergent may cause
detergent to be dispensed into the washer too early. If adding HE powder
detergent, add to the bottom of the washer basket before adding clothes.
HELPFUL TIP: See "Washer Maintenance and Care," located in your Owner's
Manual, for recommended method of cleaning washer dispenser trays.
NOTE: Make sure tray is in drawer when using liquid detergent and removed when using powder detergent. Do not
go over the Max line.
Adding fabric softener:
Pour a measured amount of liquid fabric softener into tray; always follow manufacturer's directions for correct
amount of fabric softener based on your load size. Close dispenser drawer. Fabric softener is added during rinse.
IMPORTANT: Do not overfill or dilute. Overfilling dispenser will cause fabric softener to immediately dispense into
washer. If Extra Rinse option is selected, fabric softener will be dispensed into the last rinse. It is normal for a small
amount of water to remain in the dispenser at the end of a cycle.
"How to
Description:
Wash":
Normal
Provides maximum wash time and action
for tough stains and soils. Use this cycle for
heavily soiled or sturdy items. Water level
sensing process may take longer for some
items than for others because they will
absorb more water than other fabric types.
Canada:
1–800–807–6777
Whirlpool Brand Home Appliances
Customer eXperience Centre
200–6750 Century Ave.
Mississauga, Ontario L5N 0B7
Designed to use only HE High
Efficiency detergents.

Publicité

loading

Sommaire des Matières pour Whirlpool Cabrio WTW8000DW

  • Page 1 (including cooking oils). For information on any of the following items, a full cycle guide, detailed product dimensions, or for complete instructions for use and installation, please visit https://www.whirlpool.com/owners, or in Canada Doing so can result in death, explosion, or fire.
  • Page 2 Canada https://www.whirlpool.ca/owners. Cette vérification peut vous faire économiser le coût d’une intervention de dépannage. AVERTISSEMENT : Pour réduire le risque d’incendie, de décharge électrique ou de blessures, lire les INSTRUCTIONS IMPORTANTES DE...