Publicité
Les langues disponibles
Les langues disponibles
PROGRAMMING
IMPORTANT: The remote will activate your door or gate during
programming. Ensure door or gate is clear of ALL obstructions.
NOTE: If the Mini Universal Remote Control is being
programmed to a Genie Garage Door Opener, visit
LiftMaster.com for programming instructions.
The Mini Universal Remote Control comes preset to work with
LiftMaster Security+ 2.0
Security+ 2.0
LEARN button. Then press and hold the remote button to
complete programming. For all other garage door openers, gate
operators, and commercial door operators, follow the
programming steps below.
1
Start with your garage door, gate, or commercial door
closed.
2
Press and hold bottom button on the remote control until
the blue LED stays solid (approximately 15 seconds) then
release the button.
®
operators, press and release the operator's
®
operators. For LiftMaster
LED
Bottom
Button
Publicité
