Luvion Set Exact 70 Manuel D'utilisation page 8

THE BATH AND ROOM THERMOMETER
Use the Bath and Room Thermometer to conveniently measure the
temperature of the baby room or the bathwater.
Note: Your baby will feel most comfortable in bath if
the water temperature is between 36.5°C and 38°C .
A temperature of 39°C and above is too hot and your
baby could get burned! At a room temperature of about
18°C babies feel most comfortable when sleeping.
USING THE BATH AND ROOM THERMOMETER
Switching on: Switch on the bath thermometer by filmly hitting the
bottom side with a flat hand.
Just let the thermometer float in the bathwater or let it stand on a shelf in the
baby's room to start measuring.
Note: Mix the water thoroughly before measuring the water temperature
or put the thermometer in the tub while filling it. This will ensure a fast and
accurate reading of the water temperature.
- The display will read "COLD" when the measured temperature is below 33°C.
A comfortable bathwater temperature is between 36.5°C and 38°C.
- Warm water alert: the red warning LED will start to flash when the
measured temperature is 39 °C or above. The display will then flash "Hot. "
8