Luvion Set Exact 70 Manuel D'utilisation page 4

Note: The body temperature is different for all humans and changes during
the day. You are therefore advised to measure the temperature at a specific
time in the morning.
4. Start the measurement when the screen displays "Lo °C" or "Lo °F". During
measurement the symbol "°C" or "°F" will flash while the temperature
increases. When a maximum value is reached, the symbol "°C" or "°F" will
cease to flash. A buzzing sound that lasts about 10 seconds indicates that
the measurement is completed.
10 beeps in 10 seconds means that the measured temperature is normal
(below 37.8°C) 3 sets of short beeps in 10 seconds means a possible fever
(measured temperature above 37.8°C).
- When the display reads "Lo °C" or "Lo °F" then the measured
temperature is below 32.0°C/ 90 °F
- When the display reads "Hi °C" or "Hi °F" then the measured temperature
is above 43.0°C/ 109.9 °F
5. Press the power button to turn the thermometer off.
Note: The thermometer will automatically switch off after 10 minutes. Switch
the thermometer off directly after use to prolong battery life.
RECALL THE LAST TEMPERATURE
Press the power button while turning on the flex-tip thermometer. The
display will now read the last measured temperature. This is indicated by the
letter "M" displayed under the degree sign. After 3 seconds the display will
read 37.0°C and is ready for a new measurement.
CLEANING
The thermometer is waterproof and can be cleaned with water, steralization
lotion or a soft cloth.
4