Luvion Set Exact 70 Manuel D'utilisation page 6

USING THE SOOTHER THERMOMETER
1. Remove the protection cap from the soother.
2. Press the power button. The display will read "188.8E, " confirming that the
thermometer is working.
3. Place the soother in the baby's mouth.
The measurement starts when the screen displays "Lo °C" or "Lo
°F". During measurement the symbol "°C" or "°F" will flash while the
temperature increases. When a maximum value is reached (after approx.
3 minutes' , the symbol "°C" or "°F" will cease to flash. A buzzing sound
indicates that the measurement is finished.
Note: It is reccommended to leave the soother thermometer in the baby´s
mouth for 6-8 minutes to allow the soother to warm up and to get a more
accurate measurement.
- When the display reads "Lo °C" or "Lo °F" then the measured
temperature is below 32.0°C/ 90 °F
- When the display reads "Hi °C" or "Hi °F" then the measured temperature
is above 43.0°C/ 109.9 °F
Note: Drinking or eating prior to use may affect the temperature reading.
Wait half an hour before taking a measurement.
4. Press the power button to switch off the soother thermometer.
Note: The thermometer will automatically switch off after 10 minutes.
Switch the thermometer off directly after use to prolong battery life.
RECALL THE LAST TEMPERATURE
To recall the last temperature:
Press and hold the power button while turning on the soother thermometer
6