LENCO BTL-450 White Mode D'emploi page 8

Never:
- Dispose of batteries in a fire.
- Attempt to recharge ordinary batteries.
8. Set Up
1. Take out the speaker body and speaker base carefully from the box.
2. Take out the accessories (1 pc of screw and 1 pc of metal washer).
3. Fit the base with the body with 1 hole.
4. Screw the base into the body by using a proper screwdriver with the screw and washer.
5. Place the speaker in a standing position on the floor and it's ready to use.
8