Publicité
Les langues disponibles
Les langues disponibles
• Position the heater far from other sources of heat, inflammable materials (curtains, carpets, etc.),
inflammable gases or explosive materials (spray cans) and from materials that can deform on
exposure to heat. Make sure that there is 120 cm of free space in front of the fan heater and 100 cm
on the sides. Do not use this heater in the immediate surroundings of a bath, a shower or a
swimming pool. (to avoid drops of water falling on the heater or the heater falling in the water), or
in places where it could be subject to shocks.
Warning: this symbol indicates the anti-tipping switch. If any buttons have been pressed, the
appliance will start to function immediately.
• The support surface must be stable (exclude shelf) and not sloping (since the heater could tip over).
• Make sure that the n.2 air-intake grids is not obstructed by objects, fabrics or anything else to avoid
the heater overheating or breaking.
• Do not use the appliance with a timer or a programmer or with a system that can switch on the
appliance automatically, to avoid risk of fire, since a fire risk exists if the heater is covered or
positioned incorrectly. Check that no other high absorption appliances are connected to the same
power source.
• In the case of a breakdown or fault, switch off the appliance and have it checked by a
professionally qualified technician; repairs made by unqualified persons can be dangerous and
render void the warranty.
OPERATION
Each time before use, check that the appliance is in good state, that the electric cord is not damaged:
in case of doubt, do not use it but contact a qualified technician.
To use the heating fan, follow these steps:
1.
Insert the plug in the power socket.
2.
Switch on the appliance by turning clockwise the selector knob (1) to the position of the required
function.
0= off,
only ventilation, I= hot air (650W) II= very hot air (1350W).
3.
To switch off the appliance, switch off the resistance completely, let only the fan run for about 3
minutes (pos.
) to cool the resistance (this way it will last longer), then switch off the fan by
turning the knob to "0" (off). Then always remove the plug from the power socket.
Never leave the appliance connected to the socket if it is not in use, especially for long periods.
CLEANING AND MAINTENANCE
Attention: before cleaning the fan heater, turn it off, remove the plug from the outlet and wait for it
to cool.
• Periodically check that the air-intake grill is not obstructed by fuzz or threads.
• Use a soft, slightly damp cloth to clean the body; do not use metal scouring pads or abrasive
products.
• For long periods of inactivity, you must cover it and place it in a dry place; it is advisable to put it
in its original packaging to protect it from dust and humidity.
• A special tool is required to replace the electrical cord: contact an authorized service center, also
for any repairs.
• If you decide not to use the fan heater, we recommend that you make it inoperative by cutting the
power cord (but first make sure you have removed the plug from the electrical outlet), and make
those parts harmless that are dangerous when played with by children.
Do not dispose of non-biodegradable products in the environment but dispose of them in
accordance with current law. At the end of its working life, the product must not be disposed of as
urban waste. It must be taken to a special local authority differentiated waste collection centre or to a
Publicité
