AIPTEK GS 510 Plus Mode D'emploi page 9

function, the car camcorder records the GPS information
(X: Longitude, Y: Latitude, and Speed) along with the recorded videos.
GPS Signal Status:
: Receiving GPS signal
Record Video
Automatic Record
1.
You can enable 'Automatic Record' function in the menu to
automatically start video recording once the camcorder connects to
the power supply (or when the vehicle engine gets started).
Recording will automatically stop when the engine is switched off or
the charger is unplugged. To manually stop recording, press OK
button shortly.
Loop Recording:
The videos are recorded as 5 minutes per clip and saved on MicroSD
card. When the MicroSD card is full, the oldest recordings on the
card will be overwritten by new recordings.
Manual Record
2.
When the automatic record function is disabled, you can start or
stop recording by pressing OK button shortly.
Emergency Record :
3.
Bump Auto Record
? : Searching GPS signal
7