Stanley FME190 Traduction Des Instructions Initiales page 5

e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. In
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
5. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Additional power tool safety warnings for paddle
mixer.
Never clamp the product into a vice or to a work bench to
u
use as a stationary tool. This may cause serious injury.
Switch the product off immediately if the tool attachment
u
jams. Be prepared for high reaction torques, which could
cause kickbacks. The tool attachment will jam if the
product is overloaded or becomes twisted in the
workpiece.
Wear protective clothing, dust masks and protective
u
gloves when using this product. While this product is
being used, dust may be created or splashing may occur
and material or liquids may be flung around. Many types
of dust are deemed to be carcinogenic.
Always operate the product with both hands on the
u
handles. Keep a firm grip on the handles and ensure your
footing is secure on a stable, level and dry ground. Loss
of control over the product can cause personal injury.
Do not use this product to process substance which is
u
highly flammable or potentially explosive such as solvents.
Using this product will create sparks which can ignite
vapours.
Use this product indoors only. Moisture and rain can
u
damage the product or can lead to electrocution.
from the power supply, if stirred material penetrates into
the inside of the product or if the product falls into the
material being stirred. Have the product inspected by a
professional electrician. Stirred material and moisture
can damage the product or lead to electrocution, if they
penetrate inside the product.
Do not work with any substances which are harmful
u
to health. Many materials are noxious when they are
processed.
(Original instructions)
Do not breathe in any unhealthy substances and avoid
contact with your skin. Follow the manufacturers'
instructions and wear suitable personal protective
equipment.
Wait until the product has come to a complete standstill,
u
before removing it from the material being stirred and
putting it down. The bucket can get jammed or stirred
material can be flung around. This can lead to a loss of
control over the product.
Residual risks.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
Injuries caused by touching any rotating/moving parts.
u
Impairment of hearing.
u
Risk of injury when changing any parts, or accessories.
u
Health hazards caused by breathing dust developed when
u
sawing wood, especially oak, beech and MDF.
Injuries caused by prolonged use of a tool. When using
u
any tool for prolonged periods ensure you take regular
breaks.
Safety of others
This appliance is not intended for use by persons
u
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not
u
play with the appliance.
Vibration
The declared vibration emission values stated in the technical
data and the declaration of conformity have been measured
in accordance with a standard test method provided by
EN 60745 and may be used for comparing one tool with
another. The declared vibration emission value may also be
used in a preliminary assessment of exposure.
Warning! The vibration emission value during actual use of
the power tool can differ from the declared value depending
on the ways in which the tool is used. The vibration level
may increase above the level stated. When assessing
vibration exposure to determine safety measures required by
2002/44/EC to protect persons regularly using power tools
in employment, an estimation of vibration exposure should
consider, the actual conditions of use and the way the tool
is used, including taking account of all parts of the operating
cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time.
ENGLISH
5