Preparation Of Remote Control; Using Of Remote Control - akira atome LCT-B21HDU26H Manuel D'utilisation

Remote Control

Preparation of Remote Control

Place the remote control on an even surface and
insert the supplied batteries into the remote
control as follows.
1. Softly push the back cover to open the
battery compartment.
2. Insert two batteries (1.5V, size AA), please
make sure the polarity matches the marks
inside the compartment.
3. Softly press the back cover to close it.
Under normal use the battery will last
approximately six months.
Remove the batteries when the product
is not to be used for an extended period
as damage may result from corrosive
leakage invalidating the warranty.
Batteries shall not be exposed to
excessive heat such as direct sunshine,
fire or the like.
All manuals and user guides at all-guides.com
12

Using of Remote control

Point the remote control unit from no more than
about 7m from the remote control sensor and
within about 60 degrees of the front of the unit.
The operating distance may vary depending on
the brightness of the surroundings.
Do not point bright lights directly at the
remote control sensor.
Do not place objects between the
remote control unit and the remote
control sensor.
Do not use this remote control unit while
simultaneously operating the remote
control unit of any other equipment.