Recording Program - akira atome LCT-B21HDU26H Manuel D'utilisation

DVR Function
3. Using the remote control
Press the
speed.
Press the
Press the
Press the
played repeatedly. Press the

Recording program

After you setup the settings on the DVR File System menu, you can record a DTV program on the external
USB device.
1. Select the desired program to record and then press the
progress bar will be displayed.
During recording, the progress bar will disappear in 10 seconds.
Press the button again, an icon
and it will disappear in 10 seconds.
2. Recording stops when you press the
USB device automatically.
3. Press the ►PLAY button to start to play the file fresh recorded.
NOTES:
When recording, if the available storage space becomes low, the recording will be automatically
stopped.
If you turn the power off while recording, the message shown below is displayed.
If you select Yes, recording continues and the power is turned off.
If you select No, recording stops and then the power is turned off.
All manuals and user guides at all-guides.com
or button repeatedly to increases the fast forward/reverse
button to jump about 30 seconds forward.
button to jump about 30 seconds backward.
button to once to set the beginning point "A" and press the
button again to set the ending point "B". Then the segment A-B will be
will blink on the bottom right corner of the screen
STOP button and the recorded file is stored in the external
36
button to cancel the repeat segment.
button on the remote control. The