ORTHOSERVICE RO+TEN Top -S 10 Mode D'emploi page 22

P U T T I N G O N T H E A P P L I A N C E F O R T H E P A T I E N T
Top III-S 10° · REF. E112
Retain the configuration as adjusted by the doctor/technician. In order to remove
the orthotic, open the arm fixation and unhook the push-in buckle fasteners.
To put the orthotic on again, proceed as follows:
1 Place the cushion laterally at the side on which the shoulder is to be fixed;
then place the arm into the breathable arm fixation.
2 Close the waist belt with the push-in buckle fastener (fig. A).
3 Close the arm fixation with the respective Velcro
insert the thumb into the thumb support.
4 Insert the arm on the opposite side from the shoulder to be fixed through
the loop created by the shoulder and underarm belts (fig. B); Close the orthotic
with the push-in buckle fastener on the arm fixation (fig. C).
fasteners and
®