Westfalia FIRE BEAM BBQ DUAL 2IN1 Mode D'emploi Original page 15

SET UP YOUR DEVICE
•
Open the battery compartment (11) on the back of the thermometer and
insert an LR03 (AAA) battery into the battery compartment.
•
Reseat the battery compartment cover.
•
Unplug the printed foil from the LCD (1).
USE OF THE COOKING THERMOMETER
•
Before using the temperature sensors (14), clean them with hot water and
soap. Do not immerse the probe and cable in water, as the connection
between the cable and the probe is not waterproof.
•
Plug the temperature sensors to be used into the temperature sensor
connector (6). ATTENTION: If the probe is not plugged in correctly, "---" is
displayed on the LCD.
•
To switch between the °F and °C display, adjust the °C/°F selection (9) on the
back.
•
To switch the device to cooking mode, slide the mode selection (10) to the
position„".
GB INSTRUCTIONS
SAMPLE 1: In this line you can see
the TARGET temperature and the
ACTUAL temperature of the
temperature sensor in connection 1.
PROBE 2: In this line you can see the
TARGET temperature and the
ACTUAL temperature of the
temperature sensor in connection 2.
15