Brandson Equipment 303842 Consignes D'utilisation page 28

Select the desired temperature using the "Temperature controller". "-"(MIN)
is the lowest temperature setting and „+"(MAX) is the highest. To switch
off the appliance, turn the "Temperature controller" in the counter-clock-
wise direction until the appliance switches off with an audible "click".
This temperature is maintained almost constant by switching the appliance on and
off automatically. Please remember that the fan heater is switched on only if the
thermostat setting is higher than the room temperature.
7. Overheating
Overheating generally occurs only if one of the openings of the fan heater is
blocked. This appliance comes with a non self-resetting thermal fuse. The heater
switches off automatically once the overheating temperature is reached. The fan
heater can be operated again only after the fuse has been replaced by the manu-
facturer or an equally qualified technician.
8. Oscillation
Oscillation is only active on the last level of the "Power regulator" ( )
28
English