SmartSun QuickSun Urban Manuel D'instruction page 10

3.
ASEMBLY
Right bracket
1.
Attach the right bracket.
Drill two Ø 14 mm holes, and insert the screws with the right bracket. Then fix it.
2.
Attach the left bracket.
Attention: Before attaching the left bracket, put the roller with the canvas into the bracket holes. If
you don't do this before attaching the left bracket, then you won't be able to insert it.
Drill two Ø 14mm holes at a distance of:
-296 cm above the right support in a horizontal line for the 3x2.45 awning.
-196 cm above the right bracket in a horizontal line for the 2x2.45 awning.
Insert the roller bar in the holes of the supports, insert the expansion bolts in the holes we
have made and fix it to the wall.
3.
Fix the brackets (2 and 3) to the wall by tightening the expansion bolts (10)
10
Left bracket with ring for crank