Special functions
Add a receiver / more receivers
If you want to use more than one receiver to listen with this is not
a problem (e.g. during a guided tour.) In order to add a receiver go
into the menu on the extra receiver, Choose Pair. Then go into the
menu of the transmitter. Choose Pair and press OK. Pair complete!
The new receiver can then be used to listen with.
Tip: -
More than one receiver can be paired at the same time.
-
Instead of using the transmitter menu you can pair by
pushing two quick times on the menu button on the transmitter.
Watching TV
In order to be able to hear the TV or other sources of sound you
can use the sound kit. You can then listen with the receiver.
A
24
Connect the cable (A) between the TV
and the socket on the Contego transmitter
(T900). (Make sure the transmitter is set on
"Line in")
With the help of the built in microphone in
the receiver you can also listen to people
sitting next to you on the sofa.