Comfort audio Comfort Contego T900 Mode D'emploi page 17

Channel settings
The transmitter and receiver are set on the same channels when you
receive the product. To change channels choose Channel in the menu
and press OK, navigate between the channels by using the arrows up
and down. To choose a channel press OK.
Pairing
In order to use the receiver and the transmitter they must be paired.
(When you receive them they are already paired). Confirm that both
the transmitter and receiver are charged and ON. Press MENU key
on the transmitter and receiver. Scroll to PAIR and press OK (Menu
Key). A new menu will show. Press pair. The unit will display
"Wait for receiver/transmitter". Press OK on the transmitter. In a few
seconds the Units will PAIR and display "Pairing Complete".
Line in
Here you choose if you want to use a external sound source. When
you receive the Contego it is on "Line in"
Language
Select the language with the arrows. Press OK.
Key lock
When you are in the menu selection "Lock Keys" and press Menu/
OK you lock the keys. To unlock them press the up and down
arrow keys simultaneously.
17