Baby Trend SMART STEPS AC01A Serie Manuel D'instruction page 7

ASSEMBLY
NOTE: The Platform has
3 adjustable height levels.
Always adjust all the straps
to the same level (Fig. 3e).
PLATFORM POSITIONS
• Use level 1 to place the platform in the highest position,
level 2 for middle position and level 3 for the lowest position
(Fig. 3f).
NOTE: Always use the level that is most suitable for your
child's height.
• To remove the platform: unhook the adjustment plate
from the small strap (Fig. 3g).
NOTE: See strap storing in step 4.
1
level 1 example
Fig. 3f
11
Copyright © 2021, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Fig. 3e
Fig. 3g
ACTIVITY TABLE MODE
4 • If the platform is attached to
the activity center, you must
first reverse step 3.
NOTE: Always store away
all straps for the tabletop
mode as seen below.
• Align the platform to the
center opening, push the 2
tabs into the front first and
press down firmly (Fig. 4a).
• To remove the platform
apply pressure from
underneath at the pointed
side of the platform while
holding down the tabletop
(Fig. 4b). The platform
should release easily.
• Tabletop Straps: Underneath the tabletop, put the strap into
the storage slot. Pinch the strap and put the second hoop
into the tabs. Repeat for the other 2 straps (Fig. 4c).
• Platform Straps: Always secure the straps when the
platform is not in use. Be sure to lay each strap back over
itself and clip each adjustment plate to the strap. Store the
strap by pinching it into the small tabs (Fig. 4d). DO NOT
USE product with any loose and unsecured straps. Always
check product before each use.
Fig. 4c
Copyright © 2021, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
Fig. 4a
Fig. 4b
STRAP STORAGE
Fig. 4d
12