Publicité
Les langues disponibles
Les langues disponibles
OE 1318
ELECTRIC ORBITAL SANDER 2.5mm Ø150mm
WARNINGS
Exposure to DUST generated from workpiece and/ or abrasive materials can result in lung damage
and/ or other physical injury.
Use dust capture or local exhaust as stated in the MSDS.
Wear government-approved respiratory Protection and eye and skin protection.
Failure to follow this warning can result in serious lung damage and/ or physical injur
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire, and/or other serious injury. Save all warnings and
instructions for future reference. The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery operated (cordless) power tool.
1. Work Area Safety
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks, which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.
2. Electrical Safety
a. Power tools plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase
the risk of electric shock.
e. Do not hotplug the cord. Before plugging or unplugging any cord, turn off the switch.
Hotplugging will damage the power tool.
f. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
g. If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
3. Personal Safety
a. Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools may result in serious personal injury.
Publicité
