CLAS OE 1318 Mode D'emploi page 15

OE 1319
SAFETY INFORMATIONS
Important safety information
Please read, understand and follow all safety information contained in these instructions prior to the
use of this tool. Retain these instructions for future reference.
Intended use
This electric tool is intended for use in industrial locations, and used only by skilled, trained
professionals in accordance with the instructions in this manual.
This electric tool is designed to be used with a disc pad and appropriate abrasive for sanding metals,
wood, stone, plastics and other materials. It should only be used for such sanding applications and
within marked capacity and ratings. Only accessories specifi cally recommended by US should be
used with this tool. Use in any other manner or with other accessories could lead to unsafe operating
conditions.
Do not operate tool in water or in an excessively wet application.
Do not use disc pads that have a Max RPM or Max OPM less than the tool Max RPM or Max OPM
rating.
Never use disc pads that have a weight and/or size diff erent from what the tool was specifi cally
designed for.
SIGNAL INDICATIONS
WARNING Indicates a potentially hazardous situation which, if not avoided, may result in death or
serious injury and/or property damage.
CAUTION ! Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury and/or property damage
CAUTION: For safe operation, see instructions manual CAUTION: For safe operation, see instructions manual
Recycle: Do not dispose in household waste Recycle: Do not dispose in household waste
Wear hearing, eye and resoiratory protection Wear hearing, eye and resoiratory protection Wear hearing, eye and resoiratory protection Wear hearing, eye and resoiratory protection
Read operator instructions before using Read operator instructions before using Read operator instructions before using Read operator instructions before using Read operator instructions before using
ELECTRIC ORBITAL SANDER 5mm Ø150mm