Scansonic D100 Guide D'instructions page 8

z Full scan
01 It performs a station scan from channel 5A to 13F.
02 Press and hold "Scan" button to do "Full scan".
z Manual tune
01 Press the 'Menu' button to "Manual tune".
02 Press the "Select" to confirm and the DAB radio will start "Manual
tune", it will display on the screen.
03 Press "" and "" key to scroll through the frequency.
04 The device can receive the stations automatic in the available
frequency band.
05 If the radio received station at that frequency channel, the radio
will show the stations. Then you can press "select" to enter the
station list.
06 Press "Select" to select a desired station to listen to.
07 Repeat 1-6 for tune other Channel frequency.
Settings
There are 3 options for selection:
{ Contrast
{ System reset
{ Software version
8