Scansonic D100 Guide D'instructions page 13

Menu Button
The menu allows you to configure the settings for the DAB Radio.
Press the 'Menu' button to select follow options:
{ Contrast Setting
{ System reset
{ Software version
User can press "Select" key to select Mono or Auto format.
If the radio received stereo signal, it will play the stereo sound.
Otherwise it will play the mono sound.
z Software version and System reset, same as above DAB chapter.
Manual tune buttons
They allow you to change the station.
01 Press "" or "" button.
02 Press "" to tune the frequency increasingly by 0.05 MHz.
03 Press "" to tune the frequency decreasingly by 0.05 MHz.
Auto scan buttons
It allows the radio to scan FM station automatically.
01 Press "Scan" button, the radio will scan the stations by 0.05 MHz
until it finds a station.
02 To stop during auto scan, you can press "" or "" button once
again.
13