Alecto DVC166IP Mode D'emploi page 9

INSTALLATION.
Connect the LAN network if ne-
cessary, or use WiFi.
Connect the AC adapter to the
power socket (POWER) of the
camera. Wait 2 minutes for the
camera to starts up.
Insert a micro SD card
(required for firmware updates).
Press the reset button with a
paper clip until the indicator LED
starts flashing and the voice
prompt is audible. Then the
camera turns and voice promt is
audible again.
See Quick Starters Guide for registering the
camera to the app.
motion detection
Side View
2 meter
2 m 3 m 4 m 5 m
-9-