Publicité
Les langues disponibles
Les langues disponibles
GHT FRONT PANEL 1PC
RIGHT FRONT PANEL 1PC
RIGHT FRONT PANEL 1PC
Step 8
Take your electric firebox out of its packaging and position it between
the 2 legs of the mantel. Once you are close to the wall, plug the
firebox into the nearest outlet.
The firebox comes with 3 metal brackets and 15 black screws. These
CORNER BOTTOM SUPPORT 1PC
CORNER BOTTOM SUPPORT 1PC
metal brackets must be attached to all 3 sides of the firebox and 2
sides of the mantel to ensure that your firebox does not move around as
you use it. All 3 trims attach to the firebox by inserting and tightening
3 screws. Both the left and right side trim attach to the mantel front by
inserting and tightening 3 screws
The top trim does not attach to the mantel, just the firebox. if you
have any questions about the firebox please reference the installation
instructions that come with the firebox.
CORNER BOTTOM SUPPORT 1PC
CORNER BOTTOM SUPPORT 1PC
CORNER BOTTOM SUPPORT 1PC
Anti-tipping device
LOWER FACING 1PC
LOWER FACING 1PC
You must attach the anti-tipping device to the mantel and the wall.
This device is a safety feature that will prevent the mantel from tipping
over. Applied weight may cause mantel imbalance.
Attach the L brackets to the back of each mantel side using 2 small
flat head screws. Attach the crossbars to your wall at a stud if
possible. If there is no stud, drill a small hole in your wall and
insert the anchors. Ensure the screw holes are at the bottom of the
crossbars. Insert 2 large flat head screws per side. The crossbars
OWER FACING 1PC
LOWER FACING 1PC
LOWER FACING 1PC
2PCS
and the brackets must be positioned at the same height as you need
to slide the completed mantel to the right to position the L brackets
securely behind the cross bar.
2PCS
2PCS
2PCS
FLAT HEAD SCREW(4*16mm)4PCS
CK WASHER 25PCS
LOCK WASHER 25PCS
FLAT HEAD SCREW(4*16mm)4PCS
WASHER 25PCS
LOCK WASHER 25PCS
LOCK WASHER 25PCS
LEFT FRONT PANEL 1PC
LEFT FRONT PANEL 1PC
LEFT FRONT PANEL 1PC
CORNER UPRIGHT SUPPORT 1PC
CORNER UPRIGHT SUPPORT 1PC
CORNER UPRIGHT SUPPORT 1PC
CORNER UPRIGHT SUPPORT 1PC
TOP 1PC
TOP 1PC
TOP 1PC
2PCS
2PCS
2PCS
2PCS
4PCS
2PCS
FLAT HEAD SCREW(4*16mm)4PCS
FLAT HEAD SCREW(4*16mm)4PCS
FLAT HEAD SCREW(4*16mm)4PCS
UPPER FACING 1PC
UPPER FACING 1PC
CORNER UPRIGHT SUPPORT 1PC
FIREBOX SHELF 1PC
FIREBOX SHELF 1PC
FIREBOX SHELF 1PC
TOP 1PC
CORNER ATTACHMENT 1PC
TOP 1PC
2PCS
CORNER ATTACHMENT 1PC
CORNER ATTACHMENT 1PC
4PCS
4PCS
WING NUT(5*28) 25PCS
4PCS
WING NUT(5*28) 25PCS
WING NUT(5*28) 25PCS
4PCS
FLAT HEAD SCREW(4*30mm)4PCS
FLAT HEAD SCREW(4*30mm)4PCS
FLAT HEAD SCREW(4*30mm)4PCS
FLAT HEAD SCREW(4*30mm)4PCS
4
UPPER FACING 1PC
FIREBOX SHELF 1PC
FIREBOX SHELF 1PC
CORNER ATTACHMENT 1PC
CORNER ATTACHMENT 1PC
WING NUT(5*28) 25PCS
WING NUT(5*28) 25PCS
FLAT HEAD SCREW(4*30mm)4PCS
Step 8
STEP 1
STEP 1
STEP
STEP
STEP 6
Publicité
