INTRODUCTION
Thank you for buying our BoomtoneDJ wireless microphone system : UHF-
10&20.
This operation manual is for :
UHF-10 (M) : Single channel diversity handmic version
UHF-10 ( HL) : Single channel diversity headset & lavalier version
UHF-20 (M) : Dual channel handmic version
UHF-20 (HL) : Dual channel headset & lavalier version
UHF-20 (MHL) : Dual channel headset, lavalier and handmic version
CAUTION
1 / You should read all operations from this manual before using this equipment.
2 / There are no serviceable parts inside. Do not open the unit.
3 / Do not expose this unit to direct heat source, to high humidity, rain or
moisture.
4 / Do not drop the microphone.
5 / Any change or modification made to the unit will void your warranty.
REGULATIONS and FREQUENCIES
0678
BoomtoneDJ declares that this UHF-10&20 system is fully in compliance with
the requirements of the European Directive 1999/5/EC.
This system is available with choice of 4 frequencies :
Freq1 : 513.80 Mhz
Freq2 : 514.40 Mhz
Freq3 : 555.80 Mhz
Freq4 : 556.50 Mhz
Note: Frequencies for dual systems are set up as following :
UHF-20 (Freq.1&3) , UHF-20(Freq.2&4)
This Declaration of Conformity may be consulted and downloaded from this web
address : www.boomtonedj.com/UHF10&20/conformite.pdf