LG LPA-835 Manuel D'utilisation page 18

Audio/Video Connection
Audio Connection to Optional Equipment
Connect the DVD player to your optional equipment for audio
output.
Amplifier(Receiver)
COAXIAL
DIGITAL INPUT
and/or
Coaxial cable
(Not supplied)
Right side of unit
Amplifier equipped with 2-channel analog stereo or Dolby Pro
Logic ll / Pro Logic: Connect the AV OUT jacks on the DVD
player to the audio left and right IN jacks on your amplifier,
receiver, or stereo system, using the audio cables.
Amplifier equipped with 2-channel digital stereo (PCM) or
audio / video receiver equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2, or DTS): Connect one of the unit
Coaxial jack to the corresponding in jack on youramplifier. Use an
optional digital audio cable.
R L
AUDIO INPUT
Digital Multi-channel sound
A digital multi-channel connection provides the best sound quality.
For this you need a multi-channel audio / video receiver that
supports one or more of the audio formats supported by your DVD
Audio/ Video
player such as MPEG 2, Dolby Digital and DTS. Check the
cable (Supplied)
receiver manual and the logos on the front of the receiver.
Notes
• If the audio format of the digital output does not match the
• Six Channel Digital Surround Sound via a digital connection can
• To see the audio format of the current DVD in the on-screen
18
capabilities of your receiver, the receiver produces a strong,
distorted sound or no sound at all.
only be obtained if your receiver is equipped with a Digital
Multi-channel decoder.
display, press AUDIO.