Axis Communications T8604 Guide D'installation page 10

Page 10
Install the Hardware
• The media converter switch shall be installed in an environment pro-
tected against dust and water, for example indoors or in an appropriate
cabinet.
• The media converter switch shall be connected using shielded network
cables (STP) intended for their specific use. Make sure that the switch is
properly grounded. See Electromagnetic Compatibility (EMC) for regula-
tory requirements.
1. Mount the media converter switch on the wall or, if applicable, attach it to a
DIN rail in the cabinet.
2. Connect the network cables to the network connectors (RJ-45, SFP) as
required.
Ground screw
Power connector
(DC input)
Network connector
RJ-45 (2x)
AXIS T8604
Network connector
SFP (2x)