Correcting Reduced Water Flow - Sprayheads - Kohler K-498 Mode D'emploi

Correcting Reduced Water Flow – Sprayheads
If your sprayheads begin to show reduced flow or performance, follow these steps. If performance does not
improve, contact your local service representative.
Clean/Replace the Screen
Turn off the water.
Loosen the setscrew with a hex wrench.
Carefully remove the sidespray from the supply tube.
Remove the screen from inside the supply tube.
Clean or replace the screen as needed.
Insert the screen into the supply tube as shown.
Slide the sidespray over the supply tube.
Tighten the setscrew to secure the sidespray to the supply tube.
Kohler Co.
Screen
Supply
Tube
Setscrew
11
Sidespray
1000706-5-D