Kayoba 008787 Traduction Des Instructions D'origine page 12

1 Introduction
1.1 Product description
The product is a tent for 4 people.
1.2 Symbols
Read the operating instructions carefully
and make sure that you understand the
instructions before you use the product.
Save the instructions for future reference.
2 Product parts
(Figure 1)
1. Tent bag (1 pcs)
2. Pole bag
3. Peg bag
4. Outer tent
5. Inner tent
6. Groundsheet
7. Tent poles
8. Steel rods for opening sheet
9. Guy ropes
10. Tent pegs
3 Safety
3.1 Safety definitions
Warning! If you do not obey these instructions, there
is a risk of death or injury.
Caution! If you do not obey these instructions, there
is a risk of damage to the product, other materials or the
adjacent area.
Note! Information that is necessary in a given situation.
3.2 Safety instructions for assembly
Warning! If you do not obey these instructions, there
is a risk of death or injury.
● Read and understand the instructions before you use the
product.
● Save these instructions and safety instructions for future
reference.
● Do not use the product for tasks other than its intended
12
purpose. The manufacturer cannot accept liability for any
damage that is a result of improper use.
● Do not use candles, matches or other naked flames in the
vicinity of the product.
● Campfires must be several meters away from the
product.
● Make sure that you have extinguished campfires fully
before you go away from the campsite or go inside the
product.
● Do not cook food inside the product.
● Do not let children play with the product. Risk of
suffocation.
● Do not smoke inside the product.
● Do not keep flammable liquids inside the product.
● Be careful when you use lamps or heaters operated with
fuel in the tent. Use battery-powered lights and heaters
inside the product if it is possible.
● Extinguish all naked flames before you go to sleep in the
product.
● Do not fill lamps, stoves or heaters with flammable liquids
inside the product.
4 Assembly
4.1 To assemble the product
1
Spread out the outer tent with the floor side down on
a stable and level surface where you want to use the
product. (Figure 1)
2
Assemble the 4 tent poles.
3
Put the 4 assembled tent poles in the 4 sleeves on
the outer tent.
4
Erect the outer tent and put the ends of the tent poles
in the corresponding pins (pins and rings) (A) in the
corners of the outer tent. (Figure 2)
5
Attach the pins to the ground with tent pegs (B).
6
Use tent pegs to attach the elastic loops to the
ground around the bottom of the outer tent.
7
Use the hooks and rings to attach the 2 inner tents to
the underside of the outer tent (A). (Figure 3)
2022_001