Magnasonic MLD1525 Manuel D'utilisation page 12

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Connection steps:
Read the user guide supplied with your computer and ensure that it has a VGA connector
Make sure that the power of the LCD-TV and the PC are off
Connect a D type 15-pin VGA interface cable (not supplied) to the VGA video interface connector
on the PC. Then connect the other end to the VGA video interface connector on the back of the
LCD-TV. Tighten the screws on the VGA connectors once they are firmly connected
Turn on the power of the LCD-TV first and then turn on the power of the PC
Press the Input button to set the video input mode of the LCD-TV to " PC"
Our LCD-TV can support the resolutions listed in table 2 (see table below). If the resolution you
want is not listed, the LCD-TV may not display the image properly
Resolution
Horizontal frequency
( KHz)
Vertical frequency
( Hz)
Clock
( MHz)
B) Connect to external AV devices( DVD Players, Video Camera's etc.)
using Composite and S-Video inputs
Connection steps:
Read the user guide supplied with your AV device and ensure that it has Composite or S-Video
connectors
Make sure that the power of the LCD-TV and the AV device are off
Connect a Composite video cable (supplied) to the yellow Composite video connector input on the
back of the LCD TV. Now insert the other end of the composite cable into the yellow Composite
connector output on the AV device
Alternatively connect a S-video cable (not supplied, provides better image quality) to the S-Video
connector on the back of the LCD TV. Now insert the other end of the S-Video cable into the
S-Video connector on the AV device
Connect the RCA audio cables (white and red connectors) from the AV devices' RCA audio
output connectors to the RCA audio input connectors on the back of the LCD-TV
Turn on the power of the LCD-TV first, and then turn on the power of the AV device
Press the Input button to set the video input mode of the LCD-TV to "AUX" if you used a
Composite video cable to make the connection. Press the Input button to set the video input mode
of the LCD-TV to "S-Video" if you used a S-Video video cable to make the connection.
All manuals and user guides at all-guides.com
Table 2
640x480
800x600
20-55
20-55
60-75
60-75
32.5-60
32.5-60
11
1024x768
720x400
20-70
31.47
60-75
70
25-80
28.322

Publicité

Chapitres

Table des Matières
loading

Table des Matières