Connecting The Power Supply & Switching The Lcd Tv On; Connecting Different Devices To The Lcd-Tv - Magnasonic MLD1525 Manuel D'utilisation

Remote Control Keys Explained
1. POWER
2. INPUT
3. ESC
4. MENU
5. MUTE
6. VOL
7. VOL
8. PRO
9. PRO
11. 0~9
12. -/--
13. DISPLAY
14. RECALL
15.MTS
7- Connecting the Power Supply & Switching the LCD TV On
Plug the AC to DC power supply into the LCD TV. Plug the mains cable into the AC to DC power supply
and plug it into the mains supply. The green indicator on the power supply and the red indicator on the
front of the LCD TV light up. This indicates that power is present and that the LCD TV is in standby
mode.
Press the Power button on either the LCD TV or the remote control to switch the LCD TV on. The
power indicator light on the front of the LCD TV will either turn to orange or green depending upon
wether a input signal is detected.
To switch the LCD TV back to standby mode, press the Power button either the LCD TV or remote
control once more.

8- Connecting Different Devices to the LCD-TV

A) Connecting to a PC
You can use your LCD TV as a monitor for your personal computer using a VGA
cable (not supplied)
All manuals and user guides at all-guides.com
Table 1
Turn TV ON or OFF (Standby Mode)
Input Signal Selection: AUX / S-Video / PC / CATV
Exit Menu Screen
Enter Menu Screen / Press Repeatedly to Enter All Menu Screens
Mute the Volume
Decrease Volume / Change Menu Item Status
Increase Volume / Change Menu Item Status
Channel Up / Scroll Up in Menu System
Channel Down / Scroll Down in Menu System
Number / Channel Keys
Press Repeatedly to Select Between One, Two or Three Digit TV
Channel Entry
Display Current TV Channel Info / Cancel Current TV Channel Info
Display
Return To Previously Viewed Channel
Audio Channel Selection (Mono / SAP / Stereo)
10