Publicité
Les langues disponibles
Les langues disponibles
4. Insert the wall plugs into the holes.
5. Insert the ST4*30mm screws into the
wall plugs and tight.
6. Put up the cooker hood onto the fixed
screws.
7. Then use the attached accessories
enclosed to turn the safety screws into the two
holes of inside the hood, and then fix the
screws to tighten the hood onto the wall.See
pic below.
8. Install the one way valve to the cooker
hood outlet,then put the expansion pipe on the
one way valve, and lead it to outdoor, or use
the outlet cover to seal the outer outlet and
open the inner exhaust valve.
Method B:
1. Drill 4 holes of Ø 6mm at the bottom of
the hanging cupboard.See pic below.
-8-
Publicité
