Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4. Configuration with Wizard
When first powered on, during the initial boot sequence, the ShareCenter will wait
to be assigned an IP address via DHCP. If it does not receive a DHCP assigned IP
address, by default it will have a self-assigned IP address in the range of 169.254.0.0 to
169.254.255.255. It is recommended to use the included D-Link Easy Search Utility when
accessing and configuring the ShareCenter for the first time. If you want to change the IP
address before logging in or are unable to connect to the ShareCenter IP address, you
can use the Easy Search Utility provided on the product CD to locate the device on your
network and make any needed changes.
Network Storage
Device:
Refresh:
Configuration:
LAN:
Apply:
iSCSI Drive
Mapping:
Connect:
Management:
Drive Mapping:
Available Drive:
Letters:
About:
Exit:
D-Link DNS-1200-05 Quick Installation Guide
Easy Search Utility
The Easy Search Utility
displays any ShareCenter
devices it detects on the
network here.
Click Refresh to refresh the
device list.
Click Configuration to access
the Web based configuration
of the ShareCenter.
Configure the LAN Settings
for the ShareCenter here.
Click Apply to save changes
to the LAN Settings.
Displays the available iSCSI
targets on ShareCenter.
Click Connect to connect to
the iSCSI target.
Click Management to edit the
information.
Volumes available for mapping are displayed here.
Choose an available drive letter. Click Connect to map the selected volume.
Click Disconnect to disconnect the selected mapped volume.
Click About to view the software version of the Easy Search Utility.
Click Exit to close the utility.
7
Publicité
Table des Matières
