Publicité
Les langues disponibles
Les langues disponibles
6. Clip the shoulder support strap to the strap hook on the
top of the blower, as shown (Fig. 14).
Shoulder strap clips
Fig. 14
Shoulder strap hook
7. To adjust the length of the strap, push it from one end to
form a loop above, and let out as needed, then pull the
strap from the other side to tighten (Figs. 15 – 16).
Fig. 15
Fig. 16
8. With machine on operator's right hand side, place
shoulder strap across chest and over left shoulder.
Operation
Starting and Stopping
m
WARNING!
Before switching on the tool, ensure that it
is not in contact with any object.
1. Insert both batteries into the battery compartments
(Fig. 17).
Fig. 17
2. To start the cordless blower + vacuum + mulcher, slide
the ON/OFF switch forward to show the ON mark
(Fig. 18).
3. To stop the unit, slide the ON/OFF switch backward until
the OFF mark appears (Fig. 18).
Fig. 18
On/Off switch
Speed Control
This unit is equipped with six variable speed settings (1 to 6)
(Fig. 19).
• Turn the speed dial to position "1" or "2" for
LOW speeds.
• Turn the speed dial to position "3" or "4" for
MEDIUM speeds.
• Turn the speed dial to position "5" or "6" for
HIGH speeds.
12
Battery packs
Publicité
