NAIPO oCuddle Plus Manuel De L'utilisateur page 5

MASSAGE AREAS
IN THE BOX
Massager
06
Wall Adapter
OPERATION GUIDE
How to use
Place the product on desired place.
Long press (2 seconds) the power button to start the product. The heating and
rollers will automatically switch on. The default timer is 15 minutes.
Press the heating button to switch between 2 levels (High / Low) heating and
ON / OFF.
Press the massage direction adjustment button to change the massage
direction.
Press the speed adjustment button to choose among 3 massage speed levels
(Low / Medium / High).
Press the power button to stop the massage at any time.
Charging
The indicator will light up in red when the product is low on battery. When the
battery is low, plug in and charge.
Insert the cylindrical end of the charger cable into the product charging port,
and plug the adaptor into an electrical power outlet.
A full charge cycle takes approximately 4 hours. During charging, the
indicator flashes red and it turns to green when the product is fully charged.
When connected to a power supply, the product will automatically charge if
the battery is low.
The product can be used continuously for 60 minutes in a fully-charged
condition.
NOTE: The product can be used while plugged into a power source but the product
will not be charged.
HIGH / LOW / OFF
07