Publicité
Les langues disponibles
Les langues disponibles
SECURITY INSTRUCTIONS
NO
NO
NO
"BLUE 45" series motors have been designed only to automatize the movement
-
of roller shutters and awnings. Any other use is improper.
Do not squash, crush, drop or wet the tubular motor with any kind of liquid
-
material; do not pierce and do not apply any screw along the tubular.
-
The motor of series "BLUE 45" must be installed in a tube with a minimum
diameter of 50 mm.
-
If the motor is used to move awnings, keep a security horizontal distance of 40
cm between the fully opened awning and any permanent object.
-
The choice of the motor, in its use application, must be compatible with the rat-
ing marked on the motor itself.
The tubular motor has been designed to work nonstop for a maximum
-
of 4 minutes.
-
Professional technicians only must perform maintenance and repairs.
-
Professional technicians only must perform installation, complying with all
security instructions, especially those regarding electrical connections.
-
The warranty is not applicable to any damage caused by misuse, straining,
tampering on wrong connections.
-
In case the cable is damaged please call the assistance center or qualified
technical staff.
NO
NO
8
INSTRUCTIONS FOR USE AND INSTALLATION
W W A A R R N N I I N N G G
FOR PEOPLE'S SAFETY, IT IS IMPORTANT TO FOLLOW THESE INSTRUCTIONS.
KEEP THESE INSTRUCTIONS.
A WRONG INSTALLATION CAN CAUSE SEVERE INJURES.
D D O O N N O O T T permit children to play with the fixed or mobile control devices.
-
-
Before each intervention in maintenance, installation or cleaning of the windows
switch off the motor power supply.
-
Before installing the handling motor, take away the unnecessary cables and
disconnect those equipment not required for the working of the motor itself.
-
Often ceck the plant to find out any unbalances and signs of wear and tear or
damages to cables and springs. D D O O N N O O T T use the plant, if it is necessary a repair
or an adjustment, but call the assistance centre.
-
Protect the mobile parts of the motor if they have been installed at a height lower
than 2,5m from the floor or another level.
-
The switch, kept manually in tension, must be fixed near the equipment, but far
from the mobile parts and at a height at least higher than 1.5m.
-
During connection follow the instructions thoroughly. If you have any doubt,
N N E E V V E E R R act at random but consult competent technicians.
Keep away from moving awnings and rolling shutters.
-
-
Connection devices, supports and adaptors are not supplied with our motors but
separately . For use and choice consult the catalogue "Tubular motors".
9
GB
Publicité
