ARENDO MIRA Mode D'emploi page 22

Using the whisk / blender
1. Mount either the whisk or blender (depending on the desired use) on the
motor unit as described in "Mounting the attachments".
2. Add the desired ingredients to the selected container.
3. Immerse the blender / whisk completely in the ingredients and hold the
motor unit firmly.
4. Start carefully at low speed by pressing and holding the "ON/OFF" button
(2), or alternatively, the turbo button (3) for maximum power.
5. Alternatively, you can set the desired speed for the "ON/OFF" button man-
ually using the variable speed control (1).
6. Move the appliance slowly up and down and in circles to blend the ingre-
dients.
Ensure that the container is not damaged when chopping.
Do not operate the appliance unattended and check it for damage and proper
assembly before using it each time. If the appliance is blocked, disconnect the
mains plug and remove the blockage.
Using the chopper
1. Add the desired ingredients to the selected container.
2. Mount the chopper on the motor unit as described in "Mounting the
attachments".
3. Start carefully at low speed by pressing and holding the "ON/OFF" button
(2), or alternatively, the turbo button (3) for maximum power.
4. Alternatively, you can set the desired speed for the "ON/OFF" button man-
ually using the variable speed control
Ensure that the container is not damaged when chopping.
Do not operate the appliance unattended and check it for damage and proper
assembly before using it each time. If the appliance is blocked, disconnect the
mains plug and remove the blockage.
22
(1).
English