Silverline 263456 Mode D'emploi page 4

GB
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
DO NOT incinerate batteries!
Caution!
Charger: Class II construction (double insulated for additional
protection)
For indoors use only!
T-130˚
T3.15A
Internal time lag fuse with a maximum current of 3.15A.
Li-ion battery cells are recyclable and should not be disposed
of with household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling advice
Li-ion
Conforms to relevant legislation and safety standards.
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice
V Volts
~ Alternating current
A
Ampere
n
No load speed
o
Hz Hertz
W, kW Watt, kilowatt
/min or min (revolutions or reciprocation) per minute
-1
4
Original Instructions
Specification
Wrench:
Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10,8V, Li-Ion
No load speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 – 2200min
Impact rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 – 3000min
Compatible bits. . . . . . . 3/8" square drive impact driver sockets
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.3kg
Battery:
Cell type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Li-Ion
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.8V, DC
Capacity.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3Ah
Charger:
Input power. . . . . . . . . . . . . . . . . . . . . . . 230-240V~ 50Hz, 13W
Output power . . . . . . . . . . . . . . . . . . . . . . . . . . .12V DC, 450mA
Charging time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5h
Cable length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2m
Ingress protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IPX0
Protection class. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sound and vibration information:
Sound pressure L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83dB(A)
PA
Sound power L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94dB(A)
WA
Uncertainty K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3dB
Weighted vibration a . . . . . . . . . . . . . . . . . . . . . . . . . . 13.8m/s
h
Uncertainty K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5m/s²
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
WARNING: Always wear ear protection where the sound level exceeds
85dB(A) and limit the time of exposure if necessary. If sound levels are
uncomfortable, even with ear protection, stop using the tool immediately
and check the ear protection is correctly fitted and provides the correct level
of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of
touch, numbness, tingling and reduced ability to grip. Long term exposure
can lead to a chronic condition. If necessary, limit the length of time
exposed to vibration and use anti-vibration gloves. Do not operate the tool
with hands below a normal comfortable temperature, as vibration will have
a greater effect. Use the figures provided in the specification relating to
vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according
to EN60745 or similar international standards. The figures represent
normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increased levels of
noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users
who use tools for long periods of time.
General Safety
WARNING Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire and/
or serious injury.
WARNING: This appliance is not intended for use by persons (including
children) with reduced, physical or mental capabilities or lack of
experience or knowledge unless they have been given supervision or
instruction concerning use of the appliance by a person responsible
for their safety. Children must be supervised to ensure that they do not
play with the appliance.
-1
-1
2