One for All SimpleSet URC-7110 Mode D'emploi page 8

URC-7110_21t_711741_RDN1280319.qxp_OFA 28-03-19 10:57 Pagina 8
• Search Method * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
• Extra Features
(see manual on our internet site)
• Key Magic® - Allows you to program functions from your original remote control even when LOST or BROKEN.
• Macro - Allows you to send a sequence of commands with the press of a single key.
1
2
Press and hold magic for 3 seconds until the blue LED stays on.
3
Enter the 1st code listed for your
device type & brand (e.g. TV
Hitachi = 1576)
4
Congratulations! You should now be able to switch your device back ON
and control your device successfully.
8
Instruction manual
Direct Code Set Up
Find the code for your device in the Code list
(page 50 - 57). Codes are listed by device type
and brand name. The most popular code is
listed first. Make sure your device
is switched on (not on standby).
3 sec.
Press POWER.
--> The blue LED will blink twice and
then switch off.
Ready
If your device does NOT switch off?
--> Please repeat steps 1 - 3 trying
the next code listed for your
brand.
If NOT successful?
--> Try the Search Method.
x2
OFF
=