AMIX AFF 2 Serie Manuel Utilisateur page 36

WEB INTERFACE
IP parameters
Stick that box: as far as the SPL20 and AFFseries-2 are on the
same net, AFF displays the SPL20 date. Do not forget to specify
SPL20 IP address underneath.
AFFseries-2 displays the data from SPL20 (displays SPL20
GPO1 and GPO2). In that configuration the display does not need
the sensor (see example 1). When a sensor is connected, its
measurement are accessed using AFFseries-2 IP address.
Choose an IP for SPL20. It should be under the same net as your routeur.
Example 1 :
if routeur IP is 192.168. .1 then SPL20
(xxx between 2 and 254)
Example 2 :
If routeur IP is 192.168. .1 then SPL20 IP will be : 192.168. .xxx
(xxx between 2 and 254)
Attention : - IP address should be unique in the net.
- After IP modification, enter new AFFseries IP address in your browser address
Internal configuration of the equipment
From this menu one can set :
The site.
The accurate localisation on the site.
Offset
Opto couplers 1 and 2 thresholds.
Each opto coupler temporal weighting.
A or C weighting.
ENGLISH
1
0
window and validate.
http:// 192.168.x.xxx
IP will be : 192.168. .xxx 1
36
Exemple 1 d'intégration
PS 12V
SWITCH
LAN
0
AMIX - AFFseries-2
Next
PS 5V
SPL20