Specifications - Innova 3340 Manuel Du Propriétaire

•
Always inspect the tester , test leads and an y other acces-
sories for damage prior to every use. If any damage is found,
do not use tester until repairs are done.
•
Always consider electrical and electronic equipment to be ener-
gized (live). Never assume any equipment is de-energized.
•
Do not connect probes to any available (unused) terminal while
the meter is connected to a hazardous liv e circuit.
•
Never ground yourself when taking electrical measurements.
Isolate yourself from g round by using dr y rubber insulating
mats to co ver all e xposed/grounded metal. Stand on r ubber
mats and wear dry clothing.
•
Never take resistance measurements on energiz ed (live)
electrical or electronic equipment.
•
Use one hand, instead of tw o, whenever possible to tak e
measurements. If two hands must be used, use extreme cau-
tion not to contact any energized conductors with your hands.
Be certain test leads are dr y and clean.
•
Do not hold the tester when taking measurements . Place the
tester on a clean, insulating surface prior to taking any meas-
urement.
•
Don't become part of the circuit. Think safety. Act safely.
If working on a vehicle, take the following added precautions:
•
Only work on vehicle in a well ventilated area.
•
Always wear safety eye protection.
•
Avoid moving fan blades or any potentially moving parts.
•
Avoid hot engine parts.
•
Put transmission in "park" (automatic transmission vehicles) or
"neutral" (manual transmission vehicles). Set the parking brake.
•
Turn the ignition "off" before connecting or disconnecting any
testing equipment.
•
Put blocks on drive wheels.
•
Avoid wearing loose clothing or je welry when working on a
vehicle.
•
Read your vehicle's service manual and follow it's safety pro-
cedures.

SPECIFICATIONS

GENERAL SPECIFICATIONS AND FEATURES
•
3-3/4 digit LCD display (maximum reading of 4000)
•
Range Control: Auto Range
•
Automatic negative (-) polarity indication
3