MBM IN74T Manuel D'installation Et D'utilisation page 31

The authorised technical operator, in
order to perform the installation ope-
rations correctly, must respect the
following requirements: - 3 and 8 mm
screwdriver / - Adjustable pipe wren-
ch /- Gas use tools (hoses, gaskets
etc.) / - Electrician's scissors / - Wa-
ter use tools (hosesetc.) / - 8 mm hex
socket wrench / - Gas leak detector
- Tools for electric use (cables, termi-
nal blocks, industrial sockets etc.)
- 8 mm nut driver / - Complete instal-
lation set (ele etc.)
In addition to the tools listed, an
equipment lifting device is re-
quired. This equipment must
comply with all the regulations rela-
ting to lifting equipment.
INDICATION ON
RISK / Even though the rules for
"good manufacturing practice" and
the provisions of law which regulate
manufacturing and marketing of the
product have been implemented, "re-
sidual risks" still remain which, due to
the very nature of the appliance, it has
not been possible to eliminate. These
risks include:
RESIDUAL
ELECTROMAGNETIC INTER-
FERENCE / The equipment
use can damage the correct working
of cardiac stimulator (pacemaker).
RESIDUAL RISK OF DAN-
GER TO MAGNETIC COMPO-
NENTS / This risk subsists in
case of objects equipped with magne-
tic components (mobile phone, credit
cards etc.) which are placed near the
working equipment. They could suffer
alterations and be damaged.
RESIDUAL RISK OF SHOR-
TCIRCUIT / This risk exists in
case are in direct contact two or
more pots during cooking. Danger of
overheating and possible welding
between the parts.
RESIDUAL
ELECTROCUTION / This risks
remains when intervening on
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
GENERAL AND SAFETY INFORMATION
RESIDUAL
DANGER OF
RISK OF
- 7 -
live electrical and/or electronic devices.
RESIDUAL RISK OF BUR-
NING /
This risks remains
when unintentionally coming
into contact with materials at high tem-
peratures.
RESIDUAL RISK OF BURNS
DUE TO LEAKING OF MATE-
RIAL / This risks remains when
unintentionally coming into contact
with materials at high temperatures.
Containers that are too full of liquids or
solids that during warming change
morphology (changing from a solid to
a liquid), can, if used incorrectly, cau-
se burns. During operations, the con-
tainers used must be placed on easily
visible levels.
RESIDUAL RISK OF CRU-
SHING LIMBS / This risk exists
where there is accidental con-
tact between the parts during positio-
ning, transportation, storage and as-
sembly.
RESIDUAL RISK OF EXPLO-
SIONS / This risk remains
when:
• there is smell of gas in the room;
• appliance used in an atmosphe-
re containing substances which risk
exploding;
• using food in closed containers (such
as jars and cans), if they are not sui-
table for the purpose.
RESIDUAL RISK OF FIRE /
This risk exists by flammable li-
quids / material flammable
NEW! REMOVABLE BOTTOM /
vd. SECT. ILL - REF. f)
In the models provided (free cupboard
bottom), it is possible to remove the
lower surface for installation and main-
tenance operations (eg inspections,
connections, cleaning etc). To remo-
ve the bottom, unscrew and remove
it (Part A). To reposition the bottom,
insert and screw again (Part B).
In case of doors, need to di-
sassembled before (hinges
and fixing).
2.
EN