Publicité
Les langues disponibles
Les langues disponibles
Antenna Type
Forward Gain
Bandwidth
Polarization
Connector Type
Half Power Beam Width
SWR
Power Handling Capability
Radome Depth
Ground Plane Diameter
Mounting Bracket
Radome Material
Element
Element Support
Hardware
Approximate Weight
The A 5000-CP antenna has RF performance characteristics that are extremely
desirable for usage in the UHF broadcast band, both as transmit and receive
device. Actual installations have demonstrated that the circular polarization of
this antenna minimizes variations in signal strength and almost completely
eliminates multipath problems, a primary cause of 'hits' or nulls. The gain of this
antenna over the entire UHF band is superior to the common 'off the shelf' an-
tennas. The A 5000-CP's extreme broadband capability provides the freedom to
utilize just one antenna model anywhere in the UHF spectrum. Because of its
unique 3 dimensional radiation pattern, the antenna can be mounted above the
talent or venue, oriented with the antenna element facing down. With the main
lobe (maximum gain) of the antenna pointing downward to the desired source,
this arrangement has the advantage of greatly reduced sensitivity for potentially
interfering signals arriving horizontally.
High Gain – Minimized Multipath – Broadband
Technical Data
Circular Polarized Helical
min 8 dBi (at 650 MHz)
450 - 960 MHz
Circular
N (female), type N-male to BNC-female adapter (included)
±
40 degrees
< 1.5:1
50 W
5.5" (140 mm)
14" (356 mm) 6061 Anodized Aluminum
4 x 3.625 x 3/8" (101 x 93 x 9.5 mm)
Lexan Plate, 3/8-16 Helicoil
Matthews Pin avail. for lighting grid mount
Black Acrylic
Copper
Lexan
Stainless Steel
3.1 lbs. (1.41 kg)
Circularly Polarized Antenna for the UHF Band
03.2006
Publicité
