Beper 40.220 Manuel D'instructions page 10

Rechargeable Shaver Use instructions
DESCRIPTION
1 – Head for delicate skin
2 – Head
3 – Switch on/off
4 – Unit/ergonomic grip
5 – Charger
6 – Charge light indicator
7 – Brush
8 – Adaptator
CHARGE OF BATTERY
The better temperature for charging the rechargeable lady shaver is between 5°C and 35°C. do not
expose the rechargeable lady shaver to high temperature for so long.
Before charging, make sure the rechargeable lady shaver is turned off.
Connect the cord supply to the socket, the charge light indicator lights up and becomes red.
Leave the rechargeable lady shaver is in charge continuously for 10 hours.
For a maximum duration, it is recommended to make the battery charged only when completely low.
USE INSTRUCTIONS
Switch on the rechargeable lady shaver by pushing up the switch on/off.
Put the rechargeable lady shaver perpendicularly to skin, press the switch on/off. Give a continuous
movement to the rechargeable lady shaver, without pressure.
For better results let the rechargeable lady shaver runs in various directions, to shave all hair.
For delicate skin and/or longest hair, insert the head and start shaving.
When complete, switch off the rechargeable lady shaver by pressing down the switch on/off.
CLEANING THE RECHARGEABLE LADY SHAVER
After every use switch off the rechargeable lady shaver.
A regular cleaning ensure better use of the rechargeable lady shaver.
Remove the head for delicate skin, if used.
Remove the head, remove the base by pressing the remove base button and remove hair with the
brush or under running water.
Wipe carefully.
Replace the base by pressing on the device until completely being inserted (you can hear a click).
Insert the head on the base by pressing until completely being inserted (you can hear a click).
Clean the unit with a wet cloth.
10